The best 16-inch chainsaw bar and chain is one that matches your saw’s mount, chain pitch, gauge, and drive-link count—not just its bar length. For many compatible saws, the Oregon 56-link combo is a strong option; the Oregon 55-link combo is aimed at select Stihl models. Multi-chain kits suit buyers who want spare chains, while the Savior .043-inch option is designed for specified EGO and other saws.
| Product | Key specification | Best for |
|---|---|---|
| Oregon 56-link combo | 3/8-inch LP, .050-inch gauge, A041 | Listed A041-mount models |
| Oregon 55-link combo | 3/8-inch LP, .050-inch gauge, A074 | Select Stihl saws |
| ZIYIZE four-chain kit | 3/8-inch LP, .050-inch gauge, 56 links | Buyers wanting spare chains |
| Fifchall three-chain kit | 3/8-inch LP, .050-inch gauge, 56 links | Listed 16-inch saws and pole saws |
| Savior EGO-compatible combo | 3/8-inch LP, .043-inch gauge, 56 links | Specified EGO models |
Oregon 56-Link Bar And Chain Combo
This Oregon replacement set pairs a 16-inch bar with an S56 chain. Its listed specifications are 3/8-inch low-profile pitch, .050-inch gauge, 56 drive links, and an A041 motor mount. The manufacturer lists compatibility with select saws from Craftsman, ECHO, Earthwise, Homelite, Makita, Oregon, Poulan, Ryobi, and Wen.
Best for: Owners of a listed model that specifically requires an A041 mount and 56-link chain. It was selected for its clearly stated measurements and broad list of named compatible saws. Check before buying: A 16-inch bar alone does not confirm fit; verify all four specifications against your saw.
Oregon 55-Link Stihl Combo
This Oregon combo uses a 16-inch bar and S55 chain with 3/8-inch low-profile pitch, .050-inch gauge, 55 drive links, and an A074 mount. The listed fit includes select Stihl models such as the MS 170, MS 180, and MS 180 C. Oregon’s LubriTec oiling system is described as helping keep the chain and guide bar oiled to reduce friction.
Best for: Owners of the listed Stihl models whose saw calls for the A074 mount and 55-link chain. The specific fit information and named oiling feature make it a useful comparison for Stihl buyers. Check before buying: It is not interchangeable with the A041, 56-link combination solely because both bars are 16 inches.
ZIYIZE Four-Chain Replacement Kit
This kit includes one 16-inch bar and four chains. The chains are listed as 3/8-inch low-profile pitch, .050-inch gauge, and 56 drive links. The product description names brands including Makita, ECHO, Homelite, Poulan, Greenworks, Ryobi, and Husqvarna, provided the saw uses matching specifications. It also describes the chains as pre-sharpened and the cutters as chrome-plated.
Best for: Buyers who want replacement chains on hand and have verified the saw’s fit requirements. Its four-chain supply is the main distinction from single-chain combos. Check before buying: The broad brand list is not a guarantee of fit for every model; match pitch, gauge, links, and mount.
Fifchall Three-Chain Bar Kit
Fifchall supplies one 16-inch bar and three chains. The listed chain size is 3/8-inch low-profile pitch, .050-inch gauge, and 56 drive links. Its compatibility information names a range of brands and models, including select Craftsman, ECHO, Ryobi, Poulan, Homelite, Husqvarna, Remington, Earthwise, Makita, Greenworks, Sun Joe, and Worx saws. The description also mentions pole saw use and an ANSI kickback performance requirement.
Best for: Owners of a listed 16-inch saw who want two spare chains included. Check before buying: The product asks buyers to confirm bar length and drive links; also verify the mount and the saw’s required pitch and gauge.
Savior .043-Inch EGO Bar Combo
This Savior set is a 16-inch bar and chain combination with 3/8-inch low-profile pitch, .043-inch gauge, and 56 drive links. The listing names EGO models including CS1600, CS1604, CS1400, and CS1800, plus select models from other brands. It describes the chain as semi-chisel and low-kickback and identifies an A041 tail mount.
Best for: Owners of a listed saw that specifically requires a .043-inch chain, including named EGO models. It is included because gauge differences can make a seemingly similar 16-inch set unsuitable. Check before buying: Do not substitute this .043-inch option for a .050-inch chain unless the saw specifies it.
Buying Guide: How To Choose A 16-Inch Bar And Chain
Which measurements must match?
Confirm four details in the saw manual or the markings on the existing parts: bar length, chain pitch, gauge, and drive-link count. Also confirm the bar’s mount pattern. A 16-inch length by itself is not enough to establish compatibility. In particular, the products above include both 55- and 56-link chains, A041 and A074 mounts, and .043- and .050-inch gauges.
Should you choose a single chain or a multi-chain kit?
A combo with one replacement chain can be a straightforward choice when you need a matched bar and chain. Kits with three or four chains provide spares, which may suit buyers who prefer to keep replacement chains available. Compare the exact specifications first; a larger bundle does not make an incompatible chain fit.
How do you verify compatibility?
Use the exact saw model number, not just the brand name. Compare it with the product’s fit list, then confirm the mount and chain measurements. If the manual and listing appear to conflict, consult the saw manufacturer or a qualified service provider before installation.
Frequently Asked Questions
Can any 16-inch chain fit a 16-inch bar?
No. Chain pitch, gauge, drive-link count, and bar compatibility must also match.
What is the difference between .043-inch and .050-inch gauge?
Gauge refers to the chain drive-link thickness that fits the bar groove. Use the gauge specified for the saw and bar; these sizes should not be treated as interchangeable.
Why do some 16-inch chains have 55 links and others 56?
Drive-link count depends on the saw and bar configuration. Check the existing chain or the manual rather than assuming one count fits all 16-inch bars.
Is a 16-inch bar suitable for every chainsaw?
No. The saw must be designed for that bar length and use the matching mount and chain specifications. Follow the saw manufacturer’s instructions.