Need reliable 7/8 inch aluminum tubing for frames, supports, or DIY builds? This guide highlights top aluminum options in the 7/8″ outer diameter range, focusing on lightweight, durably finished tubes ideal for framing, fabrications, and repairs. The picks below suit different buyers—from hobbyists seeking versatile scrap-material to professionals needing precise lengths. Compare materials, finishes, and wall thickness to choose the right tube for your project. The following table summarizes key details for quick reference.
| Product | Material / Finish | Length / Pack | Best For |
|---|---|---|---|
| Randall 6 ft Anodized Aluminum Tubing | 6063-T6, Clear anodized | 6 ft | Trim, framing, displays |
| Aluminum Round Tubing 7/8″ x .050″ x 48″ | 6063-T5 extruded | 48″ | Antennas, lightweight frames |
| Randall 4 ft 3-Pack Aluminum Tubing | Clear anodized aluminum, 6063 | 4 ft, 3-pack | Bulk DIY projects, repairs |
| Stainless Steel 7/8″ OD Tubing | 304/304L, welded | 3′ length | Corrosion resistance, structural |
| uxcell 6063 Aluminum Round Tube, 8mm | 6063-T5 tempered | 300 mm | Precision components, small projects |
Randall 6 Ft Clear Anodized Aluminum Tubing
Product features: 6 ft long, 7/8″ outside diameter, .050″ wall; 6063-T6 aluminum for strength and workability; clear anodized finish provides rust resistance and a clean silver appearance. Best for trim, framing, supports, displays, and DIY projects. Consider for light-duty structural roles where a smooth, corrosion-resistant surface is desired. Caution: ensure fittings match the 7/8″ OD and wall thickness to avoid gaps in joints.
Aluminum Round Tubing 7/8″ OD x .050″ x 48″ Long
Product features: 6063-T5 extruded aluminum round tubing, single section of 48″ length; suitable for antenna projects and general fabrication. Best for projects requiring a precise, shorter length with dependable strength. Choose this if you need a lightweight, easy-to-cut option with a good balance of rigidity. Limitation: 48″ length may require splicing for longer runs, if needed.
Randall 4 Ft Aluminum Tubing 3 Pack
Product features: 4 ft length, 7/8″ round tubing with .050″ wall; 6063 alloy with T-6 temper; clear anodized finish. Best for bulk DIY projects, frames, and supports where multiple pieces are needed. Better for uniform batch fabrication than loose-stock lengths. Caution: verify total required length across multiple pieces to minimize waste.
Stainless Steel 7/8″ OD Tubing
Product features: 7/8″ OD, 304/304L stainless, welded, 3′ length, 16 gauge wall (.065″); bright annealed outside finish resists corrosion. Best for projects requiring higher corrosion resistance and a welded construction. Choose this option if stainless steel is preferred for outdoor or chemical exposure environments. Limitation: heavier than aluminum, which may affect handling and fabrication ease.
uxcell 6063 Aluminum Round Tube
Product features: 6063 aluminum with good corrosion resistance and weldability; 8mm outside diameter with 7mm inner diameter, 300 mm length; T5 temper for increased strength. Best for precision components and compact projects where small diameter tubes are needed. Caution: 300 mm length is short for larger builds and may require multiple segments for longer spans.
Buying Guide: How To Choose The Right 7/8″ Aluminum Tubing
What will you build? Consider load, span, and environment. Larger or thicker walls offer more strength but add weight and cost. For indoor use, clear anodized aluminum provides corrosion resistance and a clean look. For outdoor or wet environments, consider thicker walls or stainless options.
What length do you need? If your project requires long continuous runs, 6 ft or 4 ft lengths work well, but may still require cutting. For prototypes or modular builds, 48″ or shorter pieces simplify assembly.
What tolerances are essential? Some listings show each piece as a single length; others are sold in packs. Check outer diameter, wall thickness, and length consistency to ensure fittings and sleeves align properly.
Finish considerations matter: anodized surfaces resist rust and scratching, while mill finishes may be suitable for a raw metal aesthetic. For applications requiring assembly with other hardware, ensure compatibility with your connectors or clamps.
Buying Questions You Might Ask
- Which tubing is best for light framing versus heavy-duty framing?
- Is aluminum easier to work with than stainless steel for DIY projects?
- Do I need a specific finish to resist corrosion in outdoor use?
- How do I confirm the tubing will fit my fittings and connectors?
FAQ
- What is the typical wall thickness for 7/8″ aluminum tubing listed here?
- Can 6063-T6 aluminum be welded easily?
- Is anodized aluminum better for outdoor projects than raw aluminum?
- What length should I choose for a modular frame?
- Are there cost differences between aluminum and stainless options?