The best drill bits for hammer drills depend on the tool’s chuck and the material you need to drill. SDS Plus sets are suited to compatible rotary hammer drills and often include chisels, while the DEWALT set offers masonry bits for percussion drilling. For a standard hammer drill, choose bits with a shank that fits its chuck; the TITGGI set has a three-flat shank and is designed for standard drills.
| Product | Best For | Key Difference |
|---|---|---|
| TGFTGF 17-Piece SDS Plus Set | DIY drilling and light chiseling | Drill bits, several chisels, and a case |
| DEWALT DW5207 | Percussion masonry drilling | Seven-piece masonry bit set |
| WORKPRO 17-Piece SDS-Plus Set | Concrete drilling and chipping | YG8C carbide bits and U-shaped flutes |
| WildBossy 17-Piece SDS Plus Set | Common masonry hole sizes | Lists bit sizes and chisels |
| TITGGI 10-Piece Masonry Set | Standard drill chuck use | Three-flat shanks and seven listed sizes |
TGFTGF 17-Piece SDS Plus Set
Best for: DIY users who need concrete drilling bits and chisels for occasional tile removal, grooving, or light demolition. It was selected because it combines several masonry accessories in one case.
The set includes 12 concrete bits in four size groups, two pointed chisels, two flat chisels, and a tile chisel. Its YG8C carbide tips and heat-treated construction are described as designed for impact resistance, while the sandblasted surface is intended to resist rust. The SDS Plus shank is specified for SDS Plus electric hammer drills.
Limitation: Choose it only if your tool accepts SDS Plus accessories; it is not listed as a standard three-jaw-chuck set.
DEWALT DW5207 Percussion Masonry Set
Best for: Buyers seeking a focused masonry bit set for percussion drilling in concrete and block. Its listed features center on drilling rather than chiseling, making it a simpler choice than the multi-accessory SDS Plus kits.
The seven-piece set has a two-cutter carbide tip designed to maximize carbide surface contact. A four-flute design helps clear debris during drilling, and the product listing says three flats on the shank help prevent chuck slippage, with exceptions for several listed bit models.
Limitation: The product information does not list the individual sizes in this set, so check the included size range before choosing it for a particular anchor or fastener.
WORKPRO 17-Piece SDS-Plus Set
Best for: Users with an SDS-Plus rotary hammer who want bits and chisels for drilling and masonry chipping. It stands out for its listed U-shaped flute design, which is intended to remove dust and help keep bits running smoothly and cooler.
The package includes 12 drill bits in four groups of lengths and sizes, two point chisels, three flat chisels, and a storage case. The bits use cemented YG8C carbide, which the product description identifies as suitable for brick, concrete, stone, and other masonry materials.
Limitation: It requires an SDS-Plus tool, and the supplied details do not specify the exact dimensions of each bit. Confirm the size range if hole diameter is critical.
WildBossy 17-Piece SDS Plus Set
Best for: SDS Plus rotary hammer owners who want a clearly listed selection of masonry bit sizes and chisels. It was selected because the listing names its bit diameters, which helps shoppers compare hole sizes before purchase.
The set includes 13 drill bits in sizes from 3/16 inch to 5/8 inch, one point chisel, two flat chisels, one U-groove chisel, and a storage case. Its YG8C alloy tip and alloy-steel body are specified for high-impact work on brick, tile, mortar, concrete, and other masonry.
Limitation: The listed shank type is SDS Plus, so avoid this set if your hammer drill has a standard chuck rather than an SDS Plus holder.
TITGGI 10-Piece Masonry Bit Set
Best for: Buyers using a standard drill or hammer drill with a chuck that accepts the set’s three-flat shanks. Compared with the SDS Plus options, this set is presented for general drills, electric drills, hand drills, and bench drills.
It includes 10 carbide-tipped bits, with listed diameters from 1/8 inch to 1/2 inch. The listing describes a dual U-groove design for dust removal and use on materials including cement, brick, ceramic, and glass. The package list repeats several 1/4-inch bits, so verify the assortment if you need a broad spread of sizes.
Limitation: This is a masonry bit set, not a set of SDS Plus accessories or chisels. Match the shank to your drill chuck and follow the tool maker’s guidance for the material and drilling mode.
Buying Guide: How To Choose Hammer Drill Bits
Does your drill use SDS Plus or a standard chuck?
Check the tool manual or chuck before buying. SDS Plus bits are made for compatible SDS Plus rotary hammer drills. A standard chuck requires a bit shank it can hold securely, such as the three-flat shank described for the TITGGI set. Do not assume that every bit labeled “masonry” fits every hammer drill.
What material and task are you working on?
For holes in concrete, brick, or stone, compare carbide-tipped masonry bits and the sizes supplied. If you also need to remove tile, groove masonry, or chip material, an SDS Plus set with chisels may be more useful. A percussion bit set without chisels is a more focused option for drilling.
Which bit sizes do you need?
Choose a set that includes the diameter required for your anchor, screw, or other fastener. A wide assortment is not automatically a better fit: compare the listed sizes, not just the number of pieces. Also check whether the product names exact dimensions or only groups bits by size or length.
How should you compare flute and tip designs?
Product descriptions may identify features such as carbide cutters, multiple flutes, or U-shaped channels. These are intended to support cutting or debris removal, but they do not replace matching the bit to the drill, material, and task. Follow the drill manufacturer’s instructions and use appropriate protective equipment.
Frequently Asked Questions
Can I use SDS Plus bits in any hammer drill?
No. SDS Plus bits require a compatible SDS Plus holder. Check your drill’s specifications before buying.
Are hammer drill bits the same as rotary hammer bits?
Not necessarily. The terms can refer to tools with different chuck systems and impact mechanisms. Match the bit shank to the specific tool rather than relying on the word “hammer.”
Can masonry bits drill into concrete?
The products listed here describe carbide-tipped bits for masonry materials including concrete. Check the bit’s stated material use and the drill’s instructions for your application.
Do I need chisels with my drill bits?
Only if your work includes chipping, grooving, or similar tasks and your rotary hammer supports chiseling. For drilling holes alone, a bit-only set may be sufficient.
What should I check before drilling for an anchor?
Confirm the required hole diameter, bit length, shank fit, and material suitability. Use the anchor and drill manufacturers’ instructions to determine the correct hole specifications.