For fastening to concrete, brick, or block with corrosion resistance, the SURGE BUILDING PRODUCTS stainless hammer-drive anchors are the closest match: choose the 1-inch version for shallower fastening or the 1½-inch version for longer embedment. For site marking, the survey nails offer a stainless-steel option. The Wensilon assortment is useful when you need varied stainless nail lengths, while the Zmeni kit is a concrete-wall alternative made from hardened galvanized steel, not stainless steel.
| Product | Best For | Material Or Design Note |
|---|---|---|
| SURGE 1½-inch anchor | Longer hammer-drive fastening | 304 stainless drive nail, Zamac body |
| SURGE 1-inch anchor | Shorter hammer-drive fastening | 304 stainless drive nail, Zamac body |
| Survey nails | Marking hard surfaces | Stainless option; selected variant matters |
| Wensilon 430-piece kit | Mixed-length stainless nails | 304 stainless; not specified for concrete |
| Zmeni masonry kit | Hanging items on hard walls | Hardened galvanized steel, not stainless |
SURGE 1½-Inch Stainless Hammer-Drive Anchor
This box of 100 combines a 1½-inch drive nail made from 304 stainless steel with a Zamac alloy anchor body. It is listed for concrete, block, and brick, with suggested applications including roof flashing, electrical fixtures, furring strips, and general-purpose anchoring.
Best for: Buyers who need a longer hammer-drive anchor for fastening fixtures or strips to masonry. It was selected because it directly combines a stainless drive nail with an anchor body intended for hard construction materials.
Limitation: The body is Zamac alloy, not stainless steel, so this is not an all-stainless fastener. Confirm the anchor’s dimensions and suitability for the specific load and substrate before installation.
SURGE 1-Inch Stainless Hammer-Drive Anchor
This 100-count version uses a 1-inch 304 stainless steel drive nail and a Zamac alloy body. The listed materials and uses match the longer SURGE anchor: concrete, block, or brick, including roof flashing, electrical fixtures, and furring strips.
Best for: Projects where the shorter listed anchor length better fits the fastening plan. Choose this instead of the 1½-inch version when you do not need the longer model; the product information does not specify an allowable load or required embedment.
Limitation: As with the longer version, only the drive nail is identified as 304 stainless steel. The body is Zamac alloy, so assess the environment and fastener requirements for both components.
Survey Nails For Concrete And Asphalt
These cross-head survey nails are designed to mark control points, settlement locations, layout references, and construction measurement points on concrete, asphalt, and similar surfaces. The listed selection offers stainless steel or galvanized material choices and includes a 5-centimeter (2-inch) stainless-steel option.
Best for: Surveying and jobsite marking where a visible reference point matters more than general fastening. It earns a place here because it is specifically intended for hard surfaces and offers a stainless option.
Limitation: These are markers, not general-purpose concrete anchors. Check the selected material and head style when ordering because the listing describes multiple choices.
Wensilon 430-Piece Stainless Nail Kit
This kit contains 430 nails in six lengths from ⅝ inch to 2 inches. The listing identifies the material as genuine 304 stainless steel and positions the nails for hanging, wall, and general projects. The assortment includes 120 pieces at ⅝ inch and 40 pieces at 2 inches, with other quantities distributed among the intermediate sizes.
Best for: Buyers who want a range of stainless nail lengths for general projects and can verify that the intended substrate and fastening method suit these nails. It offers more size variety than the single-length anchors above.
Limitation: The product details do not specifically say these nails are designed to penetrate concrete. Do not treat them as a substitute for masonry anchors without confirming their application requirements.
Zmeni Masonry Nails For Hard Walls
This 345-piece kit includes five nail sizes from ¾ inch to 2 inches. It is described for hanging pictures, mirrors, and shelves on brick, concrete, cement, and drywall, and features hardened high-carbon steel, a diamond point, and a thick shaft.
Best for: Buyers prioritizing a kit specifically described for hanging items on hard walls. It is a relevant masonry alternative when concrete-wall use matters more than stainless construction.
Limitation: The listed material is hardened galvanized steel, not stainless steel. Choose another option if stainless material is a strict requirement.
Buying Guide: How To Choose Concrete Fasteners
Do you need a nail or an anchor?
A plain nail and a hammer-drive anchor are not interchangeable. The SURGE products pair a drive nail with an anchor body and are explicitly listed for concrete, block, and brick. The Wensilon nails are stainless but are not identified as concrete fasteners. Match the product to the substrate and the specified installation method.
Which length should you select?
Compare the listed length with the material being fastened and the installation requirements. The SURGE options are 1 inch and 1½ inches; the longer one is not automatically the right choice for every job. Product details provided here do not include load ratings, hole dimensions, or minimum embedment, so consult the application requirements before buying.
Does “stainless” apply to every component?
Check the material of the complete assembly. Both SURGE anchors have a 304 stainless drive nail but a Zamac alloy body. Wensilon’s kit is listed as 304 stainless nails, while Zmeni’s masonry kit is galvanized steel. For outdoor or corrosive settings, the distinction can affect which product fits the project.
Is the job fastening or marking?
Use an anchor or suitable masonry fastener for attaching fixtures. Survey nails are intended to identify measurement and layout points on hard surfaces, rather than to secure building components.
Frequently Asked Questions
Can ordinary stainless nails be driven directly into concrete?
The provided Wensilon listing does not specify concrete use. Select a fastener explicitly designed for masonry unless the nail manufacturer confirms the intended substrate and method.
Are the SURGE anchors entirely stainless steel?
No. Their drive nails are listed as 304 stainless steel, while their anchor bodies are Zamac alloy.
Which SURGE anchor is longer?
The 1½-inch model is longer than the 1-inch model. Choose based on the project’s specified fastening requirements.
Are survey nails suitable for hanging fixtures?
They are described for marking control points and measurement locations, not for general fixture fastening.