The best wet saw water tray depends on whether you need a replacement gutter, a pump, or a separate catch tray. The DeWalt gutter is the most directly relevant replacement part for specified D24000 models, while the WP1000 pump is best for buyers needing water flow for wet-cutting equipment. A large PIG containment tray may suit jobs that need extra liquid capture, but it is not identified as a wet-saw-specific tray.
| Product | Best For | Key Detail |
|---|---|---|
| DeWalt 612756-00 Gutter | Specified DeWalt saws | Replacement gutter; check model fit |
| WP1000 Pump | Wet-cutting water circulation | 350 GPH, 120V |
| PIG Containment Tray | Broad liquid capture | 23.93-gallon sump capacity |
| RIDGID 58282 Drip Tray | Buyers checking a replacement tray | Verify saw compatibility |
| DeWalt D24001 Stand | Supporting a compatible saw | Stand, not a water tray |
DeWalt 612756-00 Tile Saw Gutter
This replacement gutter is listed for the DeWalt D24000 and D24000S tile saws. Its approximate dimensions are 7.80 by 7.60 by 1.85 inches. The listing describes it as a manufacturer replacement that is functionally equivalent to the previous part and says installation is easy.
Best for: Owners of a listed D24000-series model who need a replacement gutter rather than a full water tray. It is the most directly targeted wet-saw water-management component in this selection.
Check before ordering: The listing specifically advises confirming the model. Do not assume these dimensions or the part number fit other saws.
WP1000 350 GPH Submersible Pump
The WP1000 is designed for wet tile saws, brick saws, rock saws, and similar water-cooled cutting equipment. Its listed flow rate is 350 gallons per hour, and it uses a 120V power supply. A pump can address water delivery, but it is not a catch tray or replacement gutter.
Best for: Buyers whose wet-cutting setup needs a pump and whose equipment is suitable for the stated power and flow specifications. It was selected because it is explicitly intended for saws and other wet-cutting tools.
Check before ordering: The supplied information does not specify connections, dimensions, or compatibility with a particular saw. Confirm those details for your setup.
PIG 23.93-Gallon Containment Tray
This PIG tray has rim-to-rim dimensions of 52.25 by 28.25 by 5 inches, interior bottom dimensions of 48 by 24 inches, and a stated 23.93-gallon sump capacity. Its thick-wall polyethylene construction is described as chemical-resistant, and bottom ribs add strength while elevating items above trapped liquid. The listed use is temporary storage of containers that may leak or drip.
Best for: Buyers seeking a large, general-purpose liquid containment tray near a work area. It may be useful for catching or containing liquid, but the product information does not identify it as a wet-saw-specific water tray.
Check before ordering: Measure available floor space and confirm that a general containment tray suits your saw’s water-return arrangement.
RIDGID 58282 Drip Tray
The RIDGID 58282 is identified as a drip tray, and the listing describes it as a replacement-range-drip-pan product manufactured in the United States. The available details do not establish that it fits a wet tile saw, so buyers should treat it as a possible replacement component only when the part number matches their equipment.
Best for: Buyers who already know they need part 58282 and can verify it against their equipment documentation. It is included as a tray-style replacement option, not as a confirmed universal wet-saw tray.
Check before ordering: No wet-saw model compatibility or tray dimensions are provided in the product details. Confirm the part number and application before purchase.
DeWalt D24001 Wet Tile Saw Stand
This DeWalt product is a wet tile saw stand for the D24000 and D36000. Its supplied feature information identifies it as a 10-inch wet tile saw stand. It is not a tray, gutter, or pump, but it may be relevant when arranging a compatible saw and its water-management components at a work area.
Best for: Buyers who need a stand for a listed DeWalt saw, rather than a replacement water tray. It was selected as a related accessory, with its role clearly distinguished from water containment.
Check before ordering: The product details do not describe a water tray or provide further stand specifications. Do not choose it to replace a missing gutter or reservoir.
Buying Guide: How To Choose A Wet Saw Water Tray
Do you need a tray, gutter, or pump?
A tray or reservoir holds water, a gutter helps manage water around a saw, and a pump moves water to wet-cutting equipment. Identify the missing function first. A pump will not replace a damaged tray, and a general containment tray is not automatically compatible with a saw’s water-return design.
How important is saw model compatibility?
For replacement parts, match the part number and saw model before comparing other features. The DeWalt 612756-00 listing names the D24000 and D24000S, while the D24001 stand is listed for the D24000 and D36000. Those model references apply only to the products that state them; they do not establish compatibility for other items.
What dimensions and capacity should you compare?
Measure the installation area and compare a tray’s interior dimensions with the space or equipment it must serve. The PIG tray lists both exterior rim dimensions and interior bottom dimensions, which are not interchangeable measurements. Its 23.93-gallon sump capacity describes containment capacity, not a guaranteed operating volume for a wet saw.
What should you check for a pump?
Compare the stated power supply and flow rate with the requirements of your wet-cutting setup. The WP1000 lists 120V power and 350 GPH flow. The supplied details do not state its connections or model-specific fit, so confirm those points before choosing it.
Frequently Asked Questions
Is the PIG containment tray made specifically for wet saws?
No. Its listed use is temporary storage of small containers that may leak or drip. The product details do not identify it as a wet-saw tray.
Which product is the direct replacement gutter for a DeWalt D24000?
The 612756-00 gutter is listed for the DeWalt D24000 and D24000S. Confirm the saw model and part number before ordering.
Does the DeWalt D24001 stand include a water tray?
The supplied product details identify it as a stand, not a water tray. They do not state that a tray is included.
What does 350 GPH mean for the WP1000?
It is the pump’s listed flow rate: 350 gallons per hour. The provided details do not specify flow at a particular operating condition.
Can the RIDGID 58282 be used on any wet saw?
No universal wet-saw compatibility is provided. Verify that the part number matches the intended equipment before purchasing.