For wood-to-wood truss connections, choose a galvanized steel plate with pronged teeth sized for the lumber and application. The MOZCORN, Oscorna, and ZAVOOS plates are 2-by-4-inch options for buyers comparing pack size and stated tooth details; the 10-piece galvanized plate suits smaller jobs. The aluminum Mindoub base-plate set is for compatible event trussing, not wood roof trusses. Product descriptions do not establish structural ratings, so confirm suitability with your plans or a qualified building professional before using any connector in a load-bearing assembly.
| Product | Best suited for | Key details |
|---|---|---|
| MOZCORN 2×4 Truss Plates | Buyers needing 30 plates | 20-gauge steel; hot-dip galvanized |
| Oscorna 2×4 Truss Plates | Projects needing 50 plates | 1 mm thick; 9 mm teeth |
| ZAVOOS 2×4 Truss Plates | General wood repair tasks | 30 galvanized plates; 8 mm teeth |
| Mindoub Aluminum Base Plates | Compatible event trussing | Two bases and eight connectors |
| Galvanized 10-Piece Plates | Small repair batches | 2×4 inches; 1 mm thick |
MOZCORN 2×4 Galvanized Truss Plates
This set includes 30 steel plates measuring 2 by 4 inches. The product description specifies a 20-gauge thickness and hot-dip galvanized treatment, which is intended to resist rust and corrosion. Staggered prongs are designed to grip wood and help resist splitting during installation.
Best for: Buyers who need a medium-size batch for wood framing or repair tasks and want the listed galvanized finish. The stated uses include connecting roof-truss, floor-truss, and wall-frame members in prefabricated wood structures.
Limitation: The listing does not provide a structural load rating. Do not assume the plates replace an engineered or code-specified connector.
Oscorna 50-Piece 2×4 Truss Plates
Oscorna’s pack contains 50 galvanized steel plates, each measuring 2 by 4 inches and 1 mm thick. Its listed tooth height is 9 mm. The staggered fork-like prongs are described as providing a firm wood connection while helping reduce splitting during installation.
Best for: Larger repair or assembly batches where the buyer wants more pieces in one pack and values the stated 9 mm tooth height. The description mentions wood-to-wood applications, including furniture fixing and reinforcement.
Limitation: The product description does not specify an allowable load or establish approval for a particular roof or floor truss design. Check project requirements before use.
ZAVOOS 30-Piece Galvanized Truss Plates
This 30-piece set uses galvanized steel and measures 2 by 4 inches per plate. The listing states that the nail teeth are 8 mm high and describes the plates as connectors for roofing and wood-timber projects. Its pack size is comparable to the MOZCORN set, but the stated tooth height differs.
Best for: Buyers looking for a 30-piece set with a clearly stated 8 mm tooth height for wood connection or repair tasks. Choose this if that dimension matches the needs of your specific assembly.
Limitation: The listing does not state plate thickness or a structural capacity. Verify those requirements independently when they matter to the project.
Mindoub Aluminum Event Truss Base Plates
This set includes two 12-by-12-inch aluminum base plates, eight connectors, and installation hardware. The manufacturer lists 6061-T6 aluminum construction and describes the plates for compatible square event trussing, such as lighting towers, DJ setups, and display structures.
Best for: Event crews seeking bases and connection hardware for compatible square aluminum trussing. It is included because the product uses “truss plate” terminology, but its stated purpose is distinct from wood framing.
Limitation: Truss sections are not included, and this is not a wood truss connector plate. Confirm the trussing dimensions and connector compatibility before ordering.
Galvanized 10-Piece Pronged Plates
This pack contains 10 carbon-steel plates with a galvanized surface. Each plate measures 2 by 4 inches, is 1 mm thick, and has 8 mm teeth. The listing describes a staggered nail pattern intended to create a secure connection while helping resist splitting.
Best for: Small repair jobs or buyers who prefer a limited quantity rather than a 30- or 50-piece pack. Its stated dimensions make it straightforward to compare with the other 2-by-4-inch options.
Limitation: The smaller pack may not provide enough plates for a larger project. No load rating is supplied in the product information.
Buying Guide: How To Choose Wood Truss Connector Plates
What size and tooth height should you compare?
Start with the plate dimensions and the lumber layout specified for your project. The wood connector options listed here are 2 by 4 inches, but their stated tooth heights vary: 8 mm for ZAVOOS and the 10-piece set, and 9 mm for Oscorna. MOZCORN lists staggered teeth but does not provide a height in the supplied details. Do not treat similar dimensions as proof that plates are interchangeable.
Does galvanized steel matter?
Galvanized finishes are described as providing rust or corrosion resistance. Compare the exact finish stated in the listing and consider the environment where the connector will be used. A corrosion-resistant description alone does not establish suitability for every exposure or satisfy a project specification.
How many plates should you buy?
Match pack quantity to the number of connections in the plans, allowing for the project’s specified installation pattern. The wood plate options include packs of 10, 30, and 50. Larger packs may suit repeated work, while a smaller pack can reduce unused inventory on a limited repair.
Can these plates be used for structural repairs?
Product listings alone do not verify code compliance, design capacity, or approval for a load-bearing repair. Use the connector specified by the project plans, and consult a qualified professional if the work affects a roof, floor, or other structural assembly. Follow applicable installation instructions rather than substituting plates based only on size.
Frequently Asked Questions
Are wood truss connector plates the same as mending plates?
Not necessarily. These product descriptions use both terms for pronged plates, but names alone do not confirm the connector’s structural rating or intended application.
What does a staggered nail pattern do?
The listed plates describe staggered prongs as a way to grip wood and help resist splitting during installation. Follow the product’s installation directions for the intended placement.
Are the Mindoub plates suitable for wooden roof trusses?
No. The listing describes aluminum bases and connectors for compatible event trussing, not wood roof-truss connections.
Which pack is best for a small repair?
The 10-piece set is the smallest listed wood-plate pack. Confirm that its size and specifications meet the repair plan before choosing it.